DISPATCH ONLINE 24/7/365 +1 (514) 360-9570info@soobz.comMontreal, QC
Get a quote
HOME / RESOURCES / SHIPPING BASICS

Freight class explained: how LTL pricing works

What the 18 freight classes mean, why density matters most, and how to avoid re-class charges.

Shipping basics6 min read

If you ship LTL, freight class drives a big part of your rate. In the U.S. and on many cross-border lanes, LTL carriers use the National Motor Freight Classification (NMFC), which places commodities into 18 classes from 50 to 500. The lower the class, the cheaper it is to ship per pound.

01Why classes exist

A trailer runs out of space before it runs out of weight capacity when it’s full of light, bulky freight. Classes let carriers charge fairly for freight that takes up a lot of room, is hard to handle, or carries more liability.

02The four factors

  • Density: how many pounds per cubic foot your shipment weighs. This is the biggest factor.
  • Stowability: whether it can be stacked or loaded with other freight.
  • Handling: whether it needs special care or equipment.
  • Liability: how likely it is to be damaged or to damage other freight, and its value.

03How to calculate density

  1. Measure the length, width and height of the pallet in inches, including the pallet itself.
  2. Multiply them and divide by 1,728 to get cubic feet.
  3. Divide the weight in pounds by the cubic feet. That’s your density in pounds per cubic foot.

Example: a 48″ × 40″ × 50″ pallet weighing 600 lb is 55.6 cubic feet, so its density is about 10.8 pcf. That usually lands around class 92.5. Try it with our freight class estimator on the LTL page.

04Avoiding re-class charges

Carriers re-weigh and re-measure freight at their terminals. If the numbers on your bill of lading are wrong, you’ll get an inspection correction and a higher bill. Measure every pallet, include the pallet in the height, and describe the commodity accurately.

  • Use the real weight from a scale, not an estimate
  • Shrink-wrap and square off pallets so nothing overhangs
  • Note “do not stack” only when you have to; it raises the cost
  • Ask us to confirm the NMFC item for new products

Ready to ship?

Tell us about your lane and a real person will come back with a rate, usually in under 30 minutes.